Product Description
TYPE:PS-6000W
6000 Watt continuous pure sine power
18000 watt peak power
Built in smart battery charger with 7 selectable battery type settings
Auto gen start feature. Smart charger 45 Amp
Marine and industrial grade
Multiple protection functions
The 6000 watt 24 volt low frequency pure sine inverter charger is three products in one, a combination of an inverter, battery charger and AC auto-transfer switch. Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere.
· The inverter transforms DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to power tools and appliances of all varieties.
· A built-in 50 amp transfer switch allows the product to automatically switch from using a battery bank to shore power. This is great in the event of a power outage, as the product will automatically detect the outage and redirect power from your backup battery bank.
· It also has a built-in 45 amp battery charger which uses AC power, from the grid or from a fuel-powered generator for example, that can be used to recharge a battery bank as well. The battery-type selector on the top of the unit allows the ability to adjust the voltage provided to the bank.
· The built in battery charger features a seven type battery selector and 4 stage charging, for safely and effectively charging your battery source. Use this product for renewable solar, off-grid, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current.
Features
6000 watt low frequency inverter
18000 watt surge 300% surge capability
DC input and Ac output totally isolated design
High efficiency 88%--90%
Inverter power saving mode
AC/Battery Priority Selector
Terminal Block
Multi Stage Smart charger 45 Amp
Remote LED display panel and the RJ11 standard interface available
8 msec typical transfer time
optional 25W power save mode (hibernation)
7 battery type settings for charger
Containing 4-step charging modes, charging current automatic adjustment
Multiple protection functions: over voltage, low voltage, over-current, overload, output short circuit protection etc.
Specifications
Inverter Output Specifications:
Continuous Output Power: 6000 Watts
Surge Rating: 18000 Watts
Output Waveform: Pure Sine/Same as input (Bypass Mode)
Output voltage:120VAC±5% (optional 100VAC±5% or 110VAC±5%)
AC Input voltage range: 90~135VAC
Power factor: 0.1~1
Nominal Efficiency: >88% (Peak)
Line Mode Efficiency: >95%
Output Frequency: 50Hz +/- 0.5Hz / 60Hz +/- 0.5Hz
Typical Transfer Time: 8ms (Max)
THD: < 5%
Ambient operating temperature: -4°F to 122°F (-20°C to 50°C)
Input Specifications
Nominal Input Voltage: 24.0Vdc
DC Input voltage range: 20.0~32.0v
Minimum Start Voltage: 20.0Vdc
Low Battery Alarm: 21.0Vdc +/- 0.6VDC
Low Battery shutoff: 20.0Vdc +/- 0.6VDC
Low battery Trip: 20.0Vdc-21.0Vdc
High Voltage Alarm: 31.0Vdc
High Voltage shutoff: 32.0Vdc +/- 0.6VDC
Power Saver Mode Idle Consumption: 10.0 watts
Charger Specifications
Output voltage: Depends on battery Type
Charger Rate:45A
Over Charge Protection Shutdown 31.4V
Selectable Charge setting based on battery type
Adjustable charge current off--40%/60%/80%/100%
Four Stage Smart Charger
Dimensions
Unit Weight: 97.14 lbs.(44kgs)
Unit Size L x W x H: 26.38 x 8.67 x 7.10 inches (67x22x18cm)
Shipping Weight:105.97 lbs.(48kgs)
Shipping L x W x H : 30.32 x 13.39 x 12.99 inches (77*34*33cm)
Applications
Copyright © Suzhou Maili Electrical Appliance Co.,Ltd. All Rights Reserved. | Sitemap
