PASSPOWER UPS 2000 Watt Inversor Pure Sine Wave power Inverter Charger 48v Dc to 120V ac 2kw-UPS inverter

Product description: 

Model: PS-2000W-48v-120v

· 2000 Watt continuous pure sine power

· 6000 watt peak power

· Built in 30A smart battery charger with 7 selectable battery type settings

· Auto gen start feature.Multi Stage Smart charger 15 Amp

· Marine and industrial grade

Overview

PS-2000w inverter is a combination of an inverter, battery charger and AC auto-transfer switch.

This is an industrial-grade unit with the ability to withstand surges of up to 6000 watts, 

and  it achieves this by virtue of its direct connect terminal block.

The 2000 watt 48 volt low frequency Pass Power inverter charger transforms DC (direct current) power, 

produced by solar panels and stored by batteries, into AC (alternating current) electricity that can be used to run most all tools and appliances. This inverter also has a built in AC-to-DC battery converter charger, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home.

Use this product for renewable solar, off-grid home or business, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz.

It boasts an average 10 millisecond transfer time with the built-in transfer switch. This is an awesome feature for use with backup power applications, as it makes the inverter a nearly uninterrupted power supply (UPS) when combined with a battery bank.

This inverter also features a battery-type selector, which helps user regulate the voltage going into the battery bank. This capability can be a big money-saver since treating the battery bank properly will maximize its lifespan.

Use this inverter to power tools on a work truck, as it will run most electric chainsaws, portable grinders, shop vacs, and more.  Or use it to power appliances in your RV, as it won’t produce any annoying noise or pollution.  

Check out the 5000 watt low frequency Pass Power inverter charger for a comparable unit that can handle the startup surges (up to 15,000 watts for 20 seconds) of tools with larger electrical requirements, such as an air compressor.

A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (when compared to modified sine wave units) produced during the DC-to-AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency. It also provides a quieter, nearly inaudible performance.

The inverter also has conformal-coated (marine-coated) boards, making it marine-grade and resistant to dust and/or water vapor that travel through the air and could otherwise be damaging to the unit. This feature is great for boating applications, like powering a stereo system, for instance.

As with all Pass Power inverters, the PS-2000-48V-120V  is covered under a one year manufacturer’s warranty and free technical support. This inverter is also available in 12 and 24 volt models. 

Product Features for PS-2000

2000 watt low frequency inverter

6000 watt surge  300% surge capability

DC input and Ac output totally isolated design

High efficiency 88%--90%

Inverter power saving mode

AC/Battery Priority Selector

Terminal Block

Multi Stage Smart charger 15 Amp
Remote LED display and the RJ11 standard interface available
8msec typical transfer time
Selectable 25W power save mode (hibernation)
7 battery type settings for charger

Containing 4-step charging modes, charging current automatic adjustment

Multiple protection functions over-current, overload, output short circuit protection etc.

Inverter Output Specifications:

Continuous Output Power: 2000 Watts

Surge Rating: 6000 Watts

Output Waveform: Pure Sine/Same as input (Bypass Mode)

Output voltage: 120VAC±5%

AC Input voltage range: 90~135VAC

Power factor:   0.1~1

Nominal Efficiency: >88% (Peak)

Line Mode Efficiency: >95%

Output Frequency: 50Hz +/- 0.5Hz / 60Hz +/- 0.5Hz

Typical Transfer Time: 8ms (Max)

THD: < 5% 

Ambient operating temperature:-4°F to 122°F (-20°C to 50°C)

Input Specifications

Nominal Input Voltage: 48.0Vdc

Minimum Start Voltage: 40.0Vdc

Low Battery Alarm: 41.0±1.2VDC

Low Battery shutoff: 40.0±1.2VDC

Low battery Trip: 40.0Vdc-42.0Vdc

High Voltage Alarm and Shutoff: 64.0±1.2VDC

Idle Consumption: 28 watts

Power Saver Mode Idle Consumption: 10.0 watts

Charger Specifications

Output voltage: Depends on battery Type

Charger Rate:15A

Over Charge Protection Shutdown 62.8V

Selectable Charge setting based on battery type

Adjustable charge current off-40%/60%/80%/100%

Four Stage Smart Charger

Transfer Switch Specifications

30 amp auotmatic transfer switch

8 ms (max)

Dimensions 

Unit Weight: 42 lbs.(19kgs)

Unit Size L x W x H: 18.83 x 8.67 x 7.10 inches (48x22x18cm)

Shipping Weight: 53 lbs.(24kgs)

Shipping L x W x H : 23.62 x 13.39 x 12.99 inches (60*34*33cm)

Basic datasheet for Pure Sine Inverter Charger 48vdc 120vac 2000w